Accessing Probe Manager

Accessing Probe Manager

Accessing Probe Manager

 

Probe Manager is presented as a drop-down window from the RevWorks toolbar.

To Toggle the Display Probe Manager

Left click on  the RevWorks toolbar, or
From the RevWorks menu in SOLIDWORKS, select Probe Manager > Display.

Probe Manager is displayed/hidden.

Note: Probe Manager cannot be accessed for devices that do not support exchangeable Probes.

If Probe Manager does not display probe management may be disabled.

To Verify if Probe Manager is Enabled

  1. From the RevWorks toolbar, right mouse click .

The options pop-up menu for Probe Manager appears.

  1. Confirm that Management has a check mark beside it to indicate that Probe Manager is enabled.

  2. If not, Enable Probe Manager.

    • Related Articles

    • About Probe Manager Icons

      About Probe Manager Icons   The Probe Manager utility provides several functions for creating and maintaining probes and probe sets. Probe Manager organizes probes and probe sets within a probe set list. We refer to the type of graphical list in ...

    • Enabling Probe Manager

      Enabling Probe Manager   When you enable Probe Manager, you can define and use multiple probes while digitizing a part. RevWorks automatically compensates data that you collect with ball probes to maintain data alignment. Note: Probe Manager is only ...

    • Starting RevWorks

      Starting RevWorks   To start RevWorks, start SOLIDWORKS. The RevWorks toolbar automatically displays, and the RevWorks menu appears within SOLIDWORKS. The active RevWorks options are automatically adjusted depending on whether or not a document is ...

    • Accessing Alignment Manager

      Accessing Alignment Manager   Alignment Manager is presented as a drop-down window from the RevWorks toolbar. To Toggle the Display Alignment Manager Left click on the RevWorks toolbar, or From the RevWorks menu in SOLIDWORKS, select Alignment ...

    • Starting - Starting FARO USB Digitizers

      Starting FARO USB Digitizers   FARO USB portable CMMs do not require any special setup before starting. Once communication is first attempted an arm start-up calibration dialog is presented that displays a generic image of an arm and red arrows ...