RevWorks seems to be randomly offsetting in the wrong direction.
The value for the Probe Approach Tolerance may be too small. You can change the probe approach tolerance by selecting the options icon on the RevWorks toolbar, a pop-up box will appear and select the options tab, here you can set the probe approach tolerance.
Related Articles
What is Probe Compensation in RevWorks?
Probe Compensation is simply an offset created by the distance of the center of the probe and the probe radius. The direction of the offset is determined by tracking the motion of the probe until the first point is taken. For this reason, it is ...
How to change the surface options in RevWorks?
On the RevWorks toolbar, click on the options icon, a pop-up box will appear and select the surface tab. Here you will find different options for your surface.
What do the compensation icons mean in RevWorks?
The compensation indicator shows the compensation status of the current action. Compensation applies to certain features when using a ball-tipped probe. Compensation is available when collecting 2D sketch features, most planes, and those measurements ...
What is a Master Probe?
A master probe is the probe that was used for calibrating a MicroScribe arm. Your master probe should be used only when defining a custom probe and when returning a unit to Revware for service.
How to change Auto Scan distance in MUS?
Open MUS, now select the Auto Scan Icon, make sure the distance option is selected. Now click inside the box and change the distance to your preference. If you wish to change the Auto Scan distance to different units of measure, Select the ...