How to change Auto Scan timing in MUS?

• Related Articles

• How to change Auto Scan distance in MUS?

  Open MUS, now select the Auto Scan Icon, make sure the distance option is selected. Now click inside the box and change the distance to your preference.  If you wish to change the Auto Scan distance to different units of measure, Select the ...

• How to change Auto Scan units in MUS?

  If you wish to change the Auto Scan distance to different units of measure, Select the Configuration icon. A pop up box will appear and you may choose between Metric or Standard Units.

• Do you need to click the pedal/hand switch for each point?

  This depends on the software you are using the MicroScribe with. Some applications, including MicroScribe Utility Software (MUS), feature Auto Scan features that take points automatically as the MicroScribe stylus is moved across a model. In some ...

• Which frames to use in MUS?

  MUS enters data into AutoCAD by placing it in the keyboard buffer, as if you typed it in by hand. This process does not change in any way between using different reference frames in MUS. To test that MUS is reporting reasonable values when switching ...

• MUS Units of Measurement

  In the MicroScribe Utility Software (MUS) there is a configuration toggle for you to choose the units of measurement you wish to use, inches or millimeters, when collecting data with your MicroScribe arm.  When performing the SPAT (Single Point ...