Using Probes - Viewing Probe Information
Viewing Probe Information
At any time, you can easily view the definition and current information of any Probe.
To View Probe Information
-
Locate the Probe Set containing the Probe you wish to view.
-
Next to the
for the Probe Set, select .
The tree expands to display the list of Probes in the Probe Set.
-
Select the Probe you wish to view.
Current information for the Probe appears in the Probe Manager right side display..
Related Articles
Using Probes - About Probes
About Probes Probes are detailed descriptions of physical probe characteristics that influence the way RevWorks treats digitized data. With Probe Manager, you can easily add, modify and delete probes. When creating a probe you define its name, tip ...Using Probe Manager With Your Digitizer - About Using a Dynamic Reference Frame with 3DCreator Probes
About Using a Dynamic Reference Frame with 3DCreator Probes 3DCreator devices support the use of a Dynamic Reference Frame when capturing data. A DRF is an auxiliary piece of hardware with a configuration of infrared emitters, similar to a probe. ...Using Probe Manager With Your Digitizer - About Using a Dynamic Reference Frame with 3DCreator Probes - Using a Dynamic Reference Frame with a 3DCreator Probe
Using a Dynamic Reference Frame with a 3DCreator Probe DRFs are associated with specific probes within the Probe Manager. You may use a single DRF with multiple probes. In order to use a DRF with a probe, you must add identifying information to the ...Using Probe Manager With Your Digitizer - Using Probe Manager with Romer Digitizers
Using Probe Manager with Romer Digitizers The Probe Manager interface for Romer portable digitizers is highly automated. Standard Romer Probes are pre-qualified when shipped with your device and are automatically recognized when attached to your ...Using Probe Sets - Setting the Active Probe Set
Setting the Active Probe Set In order to digitize an entire part, you may need to use multiple probes. Using Probe Manager, you can choose and activate any Probe from a Probe Set to use while digitizing. The name of the active Probe and the Probe ...