Using Probe Sets - Modifying Probe Sets

Using Probe Sets - Modifying Probe Sets

Modifying Probe Sets

 

As you expand and modify the use of Probes within a Probe Set, you may want to change characteristics of the probe Set such as the Reference Probe, if there is one for the Probe Set, or other pertinent information. Probe Manager makes such changes easy.

Note: Some devices require that one Probe within a Probe Set be designated as a Reference Probe. For such devices, each Probe Set must have a Reference Probe against which you qualify other Probes in the Probe Set. If you select an unqualified Probe to be the Reference Probe, Probe Manager issues a warning message indicating that other Probes in the Probe Set are currently qualified. At that point, you can choose not to accept an unqualified Probe as the Reference Probe, or to accept the unqualified Probe and forfeit qualification for all other Probes in the Probe Set.

To Modify a Probe Set

  1. Access Probe Manager

  2. Select the Probe Set that you want to modify.

Information for the Probe Set appears on the right side of the display panel.

  1. Edit the fields as necessary.

The changes take effect immediately.