Disabling Probe Manager

Disabling Probe Manager

Disabling Probe Manager

 

You can choose whether or not to use Probe Manager for each digitizing session. When you disable Probe Manager, RevWorks treats your digitizer as a single probe device and collects data as if a point probe is in use.

To Disable Probe Manager

  1. From the RevWorks toolbar, right mouse click .

The options menu for Probe Manager appears.

  1. From the options menu, select Management.

The check mark disappears next to Management, indicating that Probe Manager is disabled.

    Warning: If after disabling Probe Manager you physically change probes during a digitizing session, the new data may not align with old data.

    • Related Articles

    • Disabling Probe Compensation

      Disabling Probe Compensation   You can choose whether or not to enable probe compensation. When you disable probe compensation, RevWorks treats your ball probe as a point probe and collects data as if a point probe is in use. The data collected is at ...

    • Disabling RevWorks

      Disabling RevWorks   Each time you start SOLIDWORKS, you start RevWorks. RevWorks does not interfere with your normal use of SOLIDWORKS. However, you can disable RevWorks at any time to prevent the automatic display of the RevWorks toolbar. You may ...

    • Enabling Probe Manager

      Enabling Probe Manager   When you enable Probe Manager, you can define and use multiple probes while digitizing a part. RevWorks automatically compensates data that you collect with ball probes to maintain data alignment. Note: Probe Manager is only ...

    • Accessing Probe Manager

      Accessing Probe Manager   Probe Manager is presented as a drop-down window from the RevWorks toolbar. To Toggle the Display Probe Manager Left click on  the RevWorks toolbar, or From the RevWorks menu in SOLIDWORKS, select Probe Manager > Display. ...

    • About Probe Manager

      About Probe Manager   RevWorks supports probe interchange for your digitizer with a utility called Probe Manager™. With Probe Manager you can: Define Probes Qualify probes Create multiple sets of probes Add, modify, and delete probes Switch between ...