Using Leap Sets - Using Stations - About Stations

• Related Articles

• Using Leap Sets - Using Stations - Linking Stations to a Reference

  Linking Stations to a Reference   To move a digitizer between two Stations a common reference must be measured from both Stations. Any individual Station may be linked to one or more unique References. In order to move a digitizer between two ...

• Using Leap Sets - Activating a Leap Set

  Activating a Leap Set   To use a specific Leap Set for collecting data from a part it must first be activated. The current Leap Set is indicated by the associated radio button that is currently selected. To Activate a Leap Set Access Alignment ...

• Using Leap Sets - Using Stations - Leaping to a Station

  Leaping to a Station   The action of moving your digitizer from one Station to another is called leaping. In order to leap between two stations the first Station must be active and there must be a common reference associated with the two Stations. If ...

• Using Leap Sets - Using Stations - Using Primary Stations - Using Primary Stations Alignment - Setting the Primary Station Alignment

  Setting the Primary Station Alignment   When one or more alignment items have been associated with a Primary Station you can select which one is to be used or select none to be used. Only Primary Stations can have associated alignment items. All ...

• Using Leap Sets - Using Stations - Using Primary Stations - About Primary Stations

  About Primary Stations   Every Leap Set has one Primary Station. When you create a Leap Set, the Primary Station is created automatically and is linked to a default Reference. The Primary Station cannot be deleted or copied, but may be configured in ...