Configuring - Configuring RevWorks to Work With Digitizers

Configuring - Configuring RevWorks to Work With Digitizers

Configuring RevWorks to Work With Digitizers

 

RevWorks requires configuration options for each digitizing device that you use. At any time, you can change configuration options for digitizers and RevWorks communication parameters. All changes take affect immediately.

Configuration options specify the manner in which RevWorks communicates with your digitizing device and control special options. Revware provides default communication parameters and specialty options for each digitizer supported. If the default communication parameters are compatible with your digitizer, RevWorks can automatically initialize your digitizer according to the configuration. Otherwise, you must manually configure RevWorks to work with your digitizer.

  1. Configuring RevWorks for MicrScribe Digitizers
  1. Configuring RevWorks for Romer Digitizers
  1. Configuring RevWorks for 3DCreatorDigitizers
  1. Configuring RevWorks for FARO USB Digitizers
  1. Configuring RevWorks for FARO Serial Digitizers
  1. Configuring RevWorks for Gage 2000a Digitizers