About RevWork Preferences

About RevWork Preferences

About RevWorks Preferences

 

RevWorks provides a variety of options for configuring your work environment. The preferences that you select affect global application functionality and remain active until manually changed.

You can change most preferences at any time, except when digitizing a feature, and your changes take effect immediately. A limited number of display preferences can be adjusted even while actively digitizing. When you first install RevWorks, verify that the default preference settings are adequately configured for your environment and make any adjustments preferred. To learn more about setting preferences, read the following topics:

  1. Feature Preferences
  2. Display Preferences
  3. Scan Mode Preferences
  4. DirectSurf Preferences
  5. Device Preferences
  6. Setting Toolbar Position
  7. About RevWorks Sounds


    • Related Articles

    • Toolbar Preferences - Setting Toolbar Position

      Setting Toolbar Position   The RevWorks toolbar can be used free floating or docked to the top or bottom of the desktop display. When free floating the width of the toolbar can be adjusted to reduce its size to save space or enlarged to provide more ...

    • Scan Mode Preferences - About Scan Mode Preferences

      About Scan Mode Preferences   RevWorks scan mode allows you to easily collect surface features and features on arbitrary sections through parts. While operating in scan mode data is streamed from your digitizing device and data is collected when ...

    • DirectSurf Preferences - About DirectSurf Preferences

      About DirectSurf Preferences   DirectSurf is a RevWorks feature method that allows you to directly create smooth surface patch features by collecting random data on a part surface. DirectSurf is intended for the collection of surface patches, not ...

    • Feature Preferences - Setting Continuous Data Collection Mode

      Setting Continuous Data Collection Mode   If you have a lot of data to collect and many of the same features to create, you can set continuous data collection. This allows you to sequentially digitize any number of features of the same type in ...

    • Display Preferences - Configuring RevWorks Location Display

      Configuring RevWorks Location Display   RevWorks allows you to configure the coordinates that display on the RevWorks toolbar and the RevWorks Position Window during data collection. There are three frames of reference from which you can choose to ...