Creating Points - Creating a 3D Point at a Location
Creating a 3D Point at a Location
RevWorks creates 3D point features from a single digitized point. RevWorks does not compensate points or 3D geometry even if probe compensation is activated.
To Create a 3D Point
-
From the RevWorks toolbar, select
,
or from the RevWorks toolbar right click on any displayed Point icon and choose 3D Points > Points,
or select Point > 3D Point > Points from the RevWorks menu in SOLIDWORKS.
RevWorks prompts you to digitize a point.
-
Digitize a location of the point on the part.
RevWorks automatically generates a 3D point feature from the collected data and draws it in the active SOLIDWORKS 3D sketch.
Related Articles
Creating Points - Creating a Sketch Point at a Location
Creating a Sketch Point at a Location RevWorks creates point features from a single digitized point. RevWorks does not compensate points even if probe compensation is activated. 2D sketch points are always projected to the active sketch plane no ...Creating Points - Creating a 3D Point at the Intersection of Three Planes
Creating a 3D Point at the Intersection of Three Planes RevWorks creates a plane-derived point by calculating the intersection of three individually digitized planes. None of the three planes used can be parallel. The resulting point feature is ...Creating Points - Creating a 3D Point at the Center of a Sphere
Creating a 3D Point at the Center of a Sphere RevWorks creates a sphere-derived point at the center of a digitized sphere. The calculated sphere is not added to the document. To Create a Sketch Point at the Center of a Sphere From the RevWorks ...Creating Points - Creating a Sketch Point at the Center of a Sphere
Creating a Sketch Point at the Center of a Sphere RevWorks creates a sphere-derived point at the center of a digitized sphere. The resulting point feature is projected to the active sketch plane. This is an important consideration since unless the ...Creating Points - Creating a Sketch Point at the Intersection of Three Planes
Creating a Sketch Point at the Intersection of Three Planes RevWorks creates a plane-derived point by calculating the intersection of three individually digitized planes. None of the three planes used can be parallel. The resulting point feature is ...