Creating 3D Curves - Creating Closed 3D Curves
Creating Closed 3D Curves
RevWorks creates closed 3D curves from a set of three or more digitized points. This type of curve may also be referred to as a non-planar curve. 3D curves are created in true 3D space, not projected to a 2D sketch plane. Closed 3D curves differ from closed 3D splines by being created outside of SOLIDWORKS 3D sketch planes and appearing as independent elements in the SOLIDWORKS feature tree. Closed 3D curves have a beginning and end points that are coincident and have tangent curvature
RevWorks does not compensate closed 3D curves even if probe compensation is activated.
To Create a Closed 3D Curve
-
From the RevWorks toolbar, select
,
or from the RevWorks toolbar right click on any displayed Spline or Curve icon and choose Curve > Closed,
or select Spline > Curve > Closed from the RevWorks menu in SOLIDWORKS.
RevWorks prompts you to begin digitizing points.
-
Digitize a minimum of three points.
Note: RevWorks automatically creates the closed 3D curve feature once you digitize the maximum number of points.
-
If you collect more than three points, but less than the maximum number of points for a curve, select
or another completion option to calculate the feature.
RevWorks generates a closed 3D curve from the collected data and places it into the SOLIDWORKS model space.
Related Articles
Creating Splines - Creating Closed Sketch Splines
Creating Closed Sketch Splines RevWorks creates splines from a set of three or more digitized points. The points collected for splines are projected to the active sketch plane before the spline is calculated. Closed sketch splines have a beginning ...Creating 3D Curves - Creating Open 3D Curves
Creating Open 3D Curves RevWorks creates open 3D curves from a set of two or more digitized points. This type of curve may also be referred to as a non-planar curve. 3D curves are created in true 3D space, not projected to a 2D sketch plane. 3D ...Creating 3D Curves
Creating 3D Curves 3D curves are spline-like SOLIDWORKS features that exist independently of sketches. Curves appear as independent elements in the SOLIDWORKS feature tree. There are two methods to create 3D curves: Creating Open 3D Curves Creating ...Creating Profiles - Creating Closed Profiles
Creating Closed Profiles Closed profiles have a connecting link between their first and last segments. RevWorks creates profiles from a set of three or more digitized points. Profiles are features created with a series of tangent lines and arcs. ...Creating Splines - Creating Closed 3D Splines
Creating Closed 3D Splines RevWorks creates closed 3D splines from a set of three or more digitized points. This type of spline may also be referred to as a non-planar curve. 3D splines are created in true 3D space in a SOLIDWORKS 3D sketch, not ...