Creating Splines

Creating Splines

Creating Splines

 

RevWorks provides multiple methods for creating spline features. Splines may be created within planar 2D sketches and 3D sketches. There are four methods to create splines:

Sketch Splines:

  1. Creating Open Sketch Splines
  1. Creating Closed Sketch Splines

3D Splines:

  1. Creating Open 3D Splines
  1. Creating Closed 3D Splines


    • Related Articles

    • Creating Splines - Creating Open Sketch Splines

      Creating Open Sketch Splines   RevWorks creates splines from a set of three or more digitized points. The points collected for splines are projected to the active sketch plane before the spline is calculated. Open sketch splines have a beginning and ...

    • Creating Splines - Creating Closed 3D Splines

      Creating Closed 3D Splines   RevWorks creates closed 3D splines from a set of three or more digitized points. This type of spline may also be referred to as a non-planar curve. 3D splines are created in true 3D space in a SOLIDWORKS 3D sketch, not ...

    • Creating Splines - Creating Closed Sketch Splines

      Creating Closed Sketch Splines   RevWorks creates splines from a set of three or more digitized points. The points collected for splines are projected to the active sketch plane before the spline is calculated. Closed sketch splines have a beginning ...

    • Creating Splines - Creating Open 3D Splines

      Creating Open 3D Splines   RevWorks creates 3D splines from a set of two or more digitized points. This type of spline may also be referred to as a non-planar curve. 3D splines are created in true 3D space in a SOLIDWORKS 3D sketch, not projected to ...

    • Creating 3D Curves - Creating Closed 3D Curves

      Creating Closed 3D Curves   RevWorks creates closed 3D curves from a set of three or more digitized points. This type of curve may also be referred to as a non-planar curve. 3D curves are created in true 3D space, not projected to a 2D sketch plane. ...