Collecting Data for Planes
Collecting Data for Planes
Using SOLIDWORKS tools, you can only create planes relative to existing planes. Using RevWorks, you can digitize planes anywhere without having to reference an existing plane.
RevWorks creates planes from digitized point data that you collect. RevWorks uses the data that you collect for planes to create new planes relative to existing planes and planar part faces or freely positioned planes.
To Collect Data for a Plane
-
Open a part file, if applicable.
-
Select a SOLIDWORKS plane, sketch, or planar part surface that defines the plane to which you want to create a relative plane.
|
|
Note: If you do not select a plane, sketch, or planar part surface to receive data, RevWorks displays a message informing you to select one before continuing. |
-
From the RevWorks toolbar or menu in SOLIDWORKS, select the type of plane you want to create.
RevWorks prompts you to begin collecting data.
-
Pressing the spacebar on your keyboard or the primary button on your digitizer, digitize the minimum number of points required to create the plane.
RevWorks provides audio feedback for every point that you digitize. Points taken while digitizing planes in RevWorks are not displayed.
|
|
Note: You can customize sounds for many events, such as: collecting data, completing feature calculation, and deleting data. For more information, see Managing RevWorks Sounds. |
Related Articles
Collecting Data for Sketch Features
Collecting Data for Sketch Features RevWorks collects data you select for 2D features and projects the points onto the active sketch plane. Points that are collected off of the surface are projected perpendicularly to the sketch. This allows you ...Collecting Data for Measurements
Collecting Data for Measurements RevWorks creates measurements from digitized point data that you collect. RevWorks uses the data that you collect for measurements to calculate relationships relative to the current sketch plane, for most ...Collecting Data for 3D Features
Collecting Data for 3D Features RevWorks collects data you select for 3D features and places the points into the active 3D sketch. Points are placed directly into the 3D sketch, as they are collected. RevWorks computes and places the generated ...About Collecting Data
About Collecting Data RevWorks provides a variety of methods for collecting data that are designed to give you great control and flexibility over the digitizing and model creation processes. Some tools are intended for capturing edge geometry, even ...Collecting Data for Curves and Surfaces
Collecting Data for Curves and Surfaces RevWorks collects data you select for curves and surfaces and places the points into the active 3D sketch. Points are placed directly into the 3D sketch, as they are collected. Unlike other 3D Features, ...