Collecting Data for Features

Collecting Data for Features

Collecting Data for Features

 

RevWorks creates features from digitized point data that you collect. RevWorks uses the data that you collect for features to place the feature in the current SOLIDWORKS sketch plane or in model space, as appropriate to the feature type.

  1. Collecting Data for Sketch Features
  1. Collecting Data for 3D Features
  1. Collecting Data for Curves and Surfaces

    • Related Articles

    • Collecting Data for Curves and Surfaces

      Collecting Data for Curves and Surfaces   RevWorks collects data you select for curves and surfaces and places the points into the active 3D sketch. Points are placed directly into the 3D sketch, as they are collected. Unlike other 3D Features, ...

    • Collecting Data for Sketch Features

      Collecting Data for Sketch Features   RevWorks collects data you select for 2D features and projects the points onto the active sketch plane. Points that are collected off of the surface are projected perpendicularly to the sketch. This allows you ...

    • Collecting Data for 3D Features

      Collecting Data for 3D Features   RevWorks collects data you select for 3D features and places the points into the active 3D sketch. Points are placed directly into the 3D sketch, as they are collected. RevWorks computes and places the generated ...

    • About Collecting Data

      About Collecting Data   RevWorks provides a variety of methods for collecting data that are designed to give you great control and flexibility over the digitizing and model creation processes. Some tools are intended for capturing edge geometry, even ...

    • Scanning Sketch Features in Scan Point Mode

      Scanning Sketch Features in Scan Point Mode   Scan point mode enables capture of point data within a limited distance of the active 2D sketch plane. This is also called snap scanning. It may help to think of the active sketch as a sectional plane. ...