Using Datums - Copying Datums
Copying Datums
Datum items can be copied to create groups of similar, but individually unique Datums.
To Copy a Datum
-
Right click on the Datum item you wish to copy.
The Datum options pop-up menu appears.
-
Select Copy.
A copy of the selected Datum is created and placed immediately below the source Datum with a default name.
|
|
Note: Before the Datum can be used it must be measured. |
Related Articles
Using Origins - Copying Origins
Copying Origins Origin items can be copied to create groups of similar, but individually unique Origins. To Copy an Origin Access Alignment Manager Right click on the Origin item you wish to copy. The Origin options pop-up menu appears. Select ...About Alignment Manager
About Alignment Manager RevWorks supports the creation of part coordinate systems to align your part within SOLIDWORKS with a utility called Alignment Manager™. With Alignment Manager you can: Align you part to the SOLIDWORKS origin and either of ...Using Datums - Renaming Datums
Renaming Datums The ability to rename alignment items allows you to clarify the intended use of a specific Datum. When copying Datums, RevWorks supplies a default name that identifies the Datum as a copy of a specific existing Datum that you are ...Using Datums - Activating a Datum
Activating a Datum To use a specific Datum for collecting data from a part in part coordinates it must first be activated. The current Datum is indicated by the associated radio button that is currently selected. To Activate a Datum Access ...About Using Alignment Manager
About Using Alignment Manager Alignment Manager is a tool for creating and managing part alignments. Creating and reusing part alignments is an important part of the digitizing process, especially if you wish to be able to revisit parts at later ...