About the MicroScribe Information Feature

About the MicroScribe Information Feature

This feature allows users to view information about the MicroScribe device that is activated through MUS.

Click on the MicroScribe Info icon to view the feature options .

The MicroScribe Info tab will appear displaying the following information:

• Identifies that the MicroScribe Connection is by a USB port or otherwise which COM port and at what baud rate.
  
  
• The Product Name always identifies "MicroScribe" if a device is present.
  
  
• The Model Name shows which model of MicroScribe device is currently in use.
  
  
• Serial Number lists the serial number of the connected MicroScribe device.
  
  
• The Device ID is a common abbreviated reference name for MicroScribe devices.
  
  
• Update Time identifies the current update frequency, in milliseconds, set for the MicroScribe device.
  
  
• Firmware Version lists the revision of the firmware loaded on the connected MicroScribe device.
  
  
• Driver Version lists the version of the communication DLL (ArmDLL32 or ArmDLL64) being used for the connected MicroScribe device.
  
  
• A link is provided to the Revware website.
  
  
• Click the About button to see which version of MUS you are using.

• Related Articles

• About the MicroScribe Configuration Feature

  About MicroScribe Configuration This feature allows users to configure general settings for the MicroScribe device that is activated through MUS. Click on the MicroScribe Configuration icon to view the feature options . The MicroScribe Configuration ...

• How to Collect Data at a Set Time

  How to Collect Data at a Set Time Click the Auto Scan icon . The Auto Scan tab will appear. Select the Time radio button, and in the Time text box enter a value for the time you would like to elapse between each point that is captured. The amount of ...

• CADpad Licensing in MUS

  In order to use the CADpad functionality in MUS, you must obtain a KeyCode from Revware, Inc. or your MicroScribe reseller. The first time you open and attempt to use CADpad, you will receive the following message:   OK: Selecting this will resume ...

• About the Scan Planes Feature

  About the Scan Planes Feature The Scan Planes feature, an advanced feature, allows for the capture 2D cross sections of data. The user defines a series of virtual planes. Then, each time the MicroScribe stylus passes through one of the planes, data ...

• About the Auto Scan Feature

  About the Auto Scan Feature This feature allows users to capture data at defined intervals of distance or time. With Auto Scan enabled, there is no need to click the input device for each point that is desired. Data will stream from the MicroScribe ...